DB6 – Die block steel/ 1.2714

DB6 is especially recommendable for Close Die Forgings due to its traits of high wear-resistance, greater durability , high hardness that’s accomplished with Cr-Ni-Mo-V high graded alloys. The equal grade DB6 / L6 / SKT4 typically used as a pre-hardened circumstance. The hardness is 360 to 430 BHN. DIN 2714 is the upgraded model of DIN 2713 for higher performance of dies. We deliver Die blocks because the greater Forging Reduction & Upsetting with Double tempered to attain the better Ultrasonic first-rate.

DB6 Steel Properties:

The special Hot Work Pre hardened Steel with properly sturdiness and excessive ware resistance. Die Steel is commonly deliver in hard, quenched & tempered and also in annealed situation in unique case. Usually its operating hardness is 360-430 BHN. This steel grade is the improve model of DIN 2713 for higher performance.

Standards of die block steel: 55NiCrMoV

DB6

DIN 2714

AISI L6

AFNOR 55NCDVV7

Standard	BRAZIL	AUSTRIA	EN	SLOVANIA	ITALY	JIS	CHINA	AMERICA	TAIWAN	CZECH REP.
1.2714	VMO	W500	56NiCrMoV7	UTOP EX2	ESKY0S2 731	SKT4	YTR6A	L6	GMKT4	TBN EX1

Chemical properties of DB6:

Manganese (correct spelling)

Carbon	Silicon	Magnesium	Phosphorus	Sulphur	Chromium	Nickle	Molybdenum	Vanadium
0.50-0.60	1.10-0.40	0.65-0.90	<0.015	<0.004	1.00-1.20	1.50-1.80	0.45-0.55	0.07-0.12

Physical Properties of DB6:

Density: 7.85kg/m3

Thermal conductivity

Microstructure

Magnetic

Forging ratio: 4:1 Minimum

Heat Treatment:

Temperature: 700 ° C
Duration : 1 hour per 25 mm wall thickness
Cooling : furnace

Hardness– 300- 440 HB

DB6 is preheated  to six hundred-700°C.Then it’s miles soaked thoroughly and the temperature is  improved  hastily to  hardening temperature ( 850-880°C).The thing is both  air quenched  or oil quenched. Tempering  of the tool  need to be achieved  as  they end up hand-heat.

Applications of DB6 – Die block steel/ 1.2714:

It is used in Forgings dies,Punches and dies,apathetic forming tools,coining dies,trimmer dies,spindle,extruding stamps,cutting,pressing press tools,hot shear knives,die holders,support tools,tool holders,pressure plates,armoured die plates,Dies for Mechanical Presses.

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

CITIES IN WHICH WE ARE DEALING:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.